Hey Everyone
Well we at Tool Depot and Tool Depot247.com have been busy with new products that our vendors are bring out this year. To start off with we (the Toolguy and I) were invited to Jackson, TN to see the Porter Cable/Delta Warehouse. This was an awesome event for us to go too. We saw the NEW Delta UniSaw that was Re-Invented!!!!
A bit of history about the Unisaw - The first Unisaw turned the industry upside down in 1938 with the first 10" Tilting arbor saw. This saw was the choice for woodworkers, furniture makers and cabinet installers.
So why did Delta feel that it was time to upgrade the Unisaw?
Why ~ that is kind of an easy question to answer, the Tablesaw is the starting focal point to a woodworker's workshop, the tablesaw is the most important part of the workshop. More important than the bandsaw, planer, scroll saw or the jointer (all of these are important but to create the best product you need to start with the best cut you can).
The new Unisaw is pretty awesome, the saw is 99.5% made in the United States with a single-cast Trunnion System while the previous saw had a 3 piece Trunnion. So what does this mean for You the consumer, Enhanced Vibration Control, Dual Front Cranks, Continuous Smooth Operation and Dependable Accuracy.
One of the biggest changes from the older Unisaw to the newer Unisaw is the SURE-LOCK dual front cranks. With the relocation of the blade height and bevel cranks to the front of the saw you can operate the saw with ease. Plus twist the center of either crank to engage the SURE-LOCK cranks to elimate errors that can be caused if the cranks are hit or bumped out of alignment.
They also added the new Precision bevel gauge that is easy to read and accurate to 1/4 degree. If the gauge ever falls out of alignment, there is a very easy fix ~ grab an allen wrench to fine-tune the blade bevel which means no more fumbling around in the cabinet for adjustments.
I think the coolest part of the new Unisaw is the cabinet construction that is Domestically-made with heavy gauged shet meal that is rock-solid and has unmatched stability. There is also more Work Surface Area, they increased the area from the front of the blade to the front of the saw to 15" for greater control. The space behind the blade is also wider and deeper for increased stability when running larger pieces of wood through the saw.
Now about the Power!!! The Unisaw now comes with a User-Requested Marathon Motor, which is an American Motor Manufacture that has a proven track record in both industrial and woodworking applications. The motor will be available in 3 & 5 HP configurations.
There is now a Larger Throat Plate Opening and Arbor Lock. A Robust on/off switch. The multi-directional off switch can be activated from any angle making it easier and aafer to use.
How about storage for your Unisaw so you can find the accessories for your Unisaw? They got that handled as well with a storage drawer that has 5 slots to saw blades. Cool, well there is more ~ It can also hold 2 riving knives, an arbor nut flange, the entire rise and fall split guard assembly, push stick, arbor wrench & throat plate. The new Unisaw comes with 1 drawer but you can purchase more drawers to be added to Unisaw. They also added a built-in storage for the BIESEMEYER fence and for the deluxe miter gauge directly on the body of the saw.
You probably are wondering about Dust Extraction ~ The new design captures dust from beneath the blade and from the bottom of the cabinet at the same time. The new dust shroud directly below the blade and the tightly sealed cabinet interior.
So if you have a tablesaw now do you use the Guard on the saw. I am guessing not but you will use the NEW Tool-Free Split Guard Design. This system has atrue rise-and-fall riving knife that incorporates components that can be easily added or removed depending on the application.
Well there is more to the New Delta Unisaw Reinvented and it is the best part ~ The BIESEMEYER fence!!!
Remember Tool Depot Sioux City and Sioux Falls is open on Saturday from 8:00 am to 4:00 pm and in LeMars from 8:00 am to 1:00 pm.
The Saws are not to be released until end of March begining of April but I will keep you posted on all of it.
Remember check back later tomorrow and we will talk more about the BIESEMEYER fence and the improvements made from the old to the new.
Laters
Toolgal
**The information for the blog came from Delta Unisaw - 92-392B**
So what is the Toolguy doing - he was fixing the antique filing cabinets in the office. One of the brass holders fell off and he need a hammer so I gave him one.
